Full-view glass
Raised-panel steel
Carriage house
Modern flush
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Spring Repair Across Broadview Park
We handle garage door spring repair in Broadview Park, FL with the same specialist approach on every call – torsion and extension systems, safety cables, and the old hardware that comes with this neighborhood’s homes. Most requests here come from the mid-century single-car garages, and we know what those springs look like before we arrive. Call (855) 658-4182 for a free estimate – we answer 24/7, with fast dispatch from 7am to 7pm.

Broadview Park is a small unincorporated pocket of Broward County just west of Fort Lauderdale, and its housing tells you almost everything about the spring work we do here. Mostly 1950s-70s concrete-block ranch homes, attached single-car garages, low-pitch roofs, and a lot of original wooden or early steel sectional doors. Those doors are still on their narrow 8-9 foot tracks, and a great many are running the same spring that lifted them through decades of South Florida heat. Our technicians have up to 14 years of experience, and much of it has been spent matching parts to hardware that was installed when a spring was expected to be replaced by the original builder.
Working on a tensioned spring is not a job to improvise. A garage door spring is under enough load to seriously injure someone who releases it wrong, and old rusted drums and cables are unpredictable. That’s why the safety work here – proper winding bars, the right cable containment, and a spring chosen for the door’s exact weight – matters more than speed. If you can hear the spring has gone but the door is stuck up or down, keep people clear of it until a trained professional looks at it.
Why Broadview Park Homeowners Call Davie Garage Door Repair Pros for Garage Door Spring Repair
Spring repair is the most safety-critical work in this trade, and it’s a dedicated service here rather than something we tack onto general handyman calls. That matters in a neighborhood where the hardware is old and the correct part is rarely on a shelf – a spring has to match the door’s weight and the existing drums and cables, and old systems don’t accept a modern off-the-rack kit. We’re also factory-familiar with the brands you’re likely to have overhead: Amarr, Wayne Dalton, and Raynor systems from those decades show up regularly, and knowing their tolerances and failure patterns saves time on diagnosis.
We serve Broadview Park and its neighbors because we already know the housing stock here. Concrete-block garages with a low block header over the opening, narrow 8-9 foot single-car doors, and hardware that’s been sitting in salt-laden coastal air. You won’t spend the first visit explaining the door. We ask what it’s doing, how old the hardware looks, and whether an opener is involved, then give you a written estimate before anything is loosened. Our garage door spring repair team comes prepared for what mid-century garages actually need.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Spring Repair Services in Broadview Park
Torsion Spring Replacement in Broadview Park
Most single-car doors in Broadview Park close on one torsion spring mounted on a shaft above the door, and when that spring snaps the door becomes dead weight. Replacing it means matching the wire size and wind to the door’s actual weight, not guessing from a label that’s been painted over. In these older concrete-block garages, we also inspect the end bearing plates and anchor, because a spring replaced onto worn or out-of-square hardware won’t hold balance. Replacement with a matched spring brings the door back to something an opener can lift without straining.
Extension Spring Replacement in Broadview Park
Some of the lighter original sectional doors here were built with extension springs running above the horizontal tracks, and those springs stretch and sag with age. We replace them in matched pairs, since a single new spring beside an old one throws the door off balance. Extension springs also need safety containment, which many older installations lack entirely – and that’s a genuine hazard in a garage this age.
Broken Spring Repair in Broadview Park
A door that slams down or suddenly won’t lift is usually a spring that has finally run out its cycles, often compounded by salt-air rust on the drums and cables. We diagnose the whole system first – spring, cables, drums, and balance – before recommending work, so you’re not paying to replace a spring on hardware that’s already seized. If the door is stuck, we can get a trained technician to it quickly rather than leaving the door blocked open or shut.
Spring Adjustment and Safety Cable Installation in Broadview Park
Sometimes the spring isn’t broken at all – it’s just out of balance, and the opener is doing the lifting the spring is supposed to do. Adjusting tension back to spec restores that balance. We also fit safety cables through extension springs so a failed spring stays contained, which is one of the cheapest protective measures on an older door. Both jobs are quick and keep the door running quietly.
Trusted Brands We Service in Broadview Park
Our technicians work on the brands that show up in Broadview Park garages, and they know each one’s quirks before they open the toolbox. Amarr, Wayne Dalton, and Raynor doors from the mid-century years are common here, and so are the openers that came with them – older Craftsman units especially. Working on a specific brand means knowing where its springs sit, how its drums are sized, and which parts are still available versus which have to be matched from a compatible modern equivalent. No brand turned away and no guesswork about what’s overhead. A spring repair on a Wayne Dalton door isn’t the same job as on a Raynor, and we treat it that way.

See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Spring Repair Problems We See in Broadview Park Homes
- Original springs that have outlived their cycles. The torsion springs on 1950s-70s single-car doors here often snap after decades of use, and the rusted drums and cables they’re paired with resist freeing up without cutting them loose. Expect the whole assembly to need attention, not just the spring.
- Salt-laden coastal air seizing the rolling parts. Broadview Park sits only a few miles from the coast, and that humidity and salt degrade lubricant on springs, rollers, and tracks. A door then balances unevenly, and the opener strains because the spring isn’t carrying the weight anymore.
- A cracked or sagging concrete-block header over the opening. The header here is often just a few courses of block, and when it settles the tracks go out of square. A spring repair alone then leaves the door binding against the jambs, so the framing has to be considered first.
- Wood panels warped by decades of subtropical humidity. Original wooden doors absorb moisture and swell or cup out of shape, which puts extra load on the springs. When panels are too far gone, a spring-and-hardware refresh won’t fully restore balance and a replacement becomes the honest answer.
If any of this sounds familiar, call (855) 658-4182. We answer 24/7, and fast dispatch runs 7am-7pm.
Pricing for Garage Door Spring Repair in Broadview Park, FL
Spring repair on one spring in Broadview Park typically runs $180 – $340. A matched pair is usually replaced together, so a pair costs about twice that. If the cables or tracks need work alongside the spring, that’s quoted separately, and we’ll give you those line items before any work starts. Prices here are typical estimates for the market, not a final figure – the written estimate sets the price, and it’s agreed before anything is loosened. Estimates are free.
| Service | Typical Estimated Range |
|---|---|
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
What pushes a job toward the higher end is usually the surrounding hardware. A re-sprung door on rusted, seized drums and cables takes longer than a clean spring swap, and rebuilding an anchor or end bearing plate on original hardware in a narrow 8-9 foot opening adds work. None of that gets added as a surprise – it’s on the written estimate before we start.
We Also Serve Cities Near Broadview Park
We serve Broadview Park and the surrounding area, including Plantation, Lauderhill, Boulevard Gardens, and Franklin Park. If your garage sits just outside the neighborhood line, we still cover the spring work – the housing stock and the hardware are much the same across these older Broward communities. Call (855) 658-4182 and we’ll confirm coverage for your address.
Serving Broadview Park, FL – Our Local Coverage Area
We serve Broadview Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Spring Repair in Broadview Park
In most cases the spring can be replaced without replacing the door, provided the rest of the hardware is sound. Original 1960s springs can be matched and replaced; the question is whether the drums, cables, and end bearing plates are healthy enough to carry a new spring safely. That’s a decision made after inspection, and the written estimate reflects whether it’s a straight re-spring or a full spring-and-hardware refresh. Call (855) 658-4182 for an exact quote – estimates are free.
Because the spring isn’t carrying the door’s weight anymore. The opener is doing the lifting, which it’s not built to do, and the strain on the motor is the sound of that. Often the spring has lost tension or is partly broken, or salt-air corrosion has seized the rollers and tracks so the door drags. A technician can check the balance and either adjust the spring back to spec or replace it. Call (855) 658-4182 to book a visit.
Yes. The subtropical heat, humidity, and salt-laden air a few miles from the coast accelerate rust on steel springs and cables and bake the lubricant off rollers and tracks. Springs and cables on older hardware here age faster than in drier parts of the country, which is why we look at the whole assembly rather than just the broken part. Call (855) 658-4182 and we’ll inspect it before quoting.
Sometimes, but the header has to be assessed first. In Broadview Park’s older block garages the header is often just a few courses of concrete block over a narrow opening, and if it’s cracked or sagging the tracks go out of square and a new spring won’t fix a door that binds against the jambs. That calls for a deeper look before any spring work. Call (855) 658-4182 so a technician can inspect it.
A replacement door in Broward County must meet the county’s wind-load requirements, and that means a rated door installed with anchoring and bracing engineered for the opening – which usually involves a permit. In Broadview Park, older homes often need the framing assessed as part of that. The specific rules for your door and opening come from Broward County’s building department, so confirm requirements there before you order. Call (855) 658-4182 to talk through repair versus replacement. New door installation typically runs $700 – $2200, and the written estimate sets the final price.
Whatever’s on your garage, one call covers it – repair, install, or emergency response. Call (855) 658-4182 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Written by the team at Davie Garage Door Repair Pros.