Full-view glass
Raised-panel steel
Carriage house
Modern flush
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Broadview Park?
Garage door work in Broadview Park typically runs $150 to $600 for most repairs, with a single spring at $180 to $340, an opener repair at $120 to $320, and a full new door at $700 to $2,200. The low end covers quick fixes like rollers, tracks, and cables. The high end covers opener installation and new-door jobs. Every price below is a typical estimated range for the Broadview Park market, and the written estimate you get before work starts sets the final price.
We’re Davie Garage Door Repair Pros, and garage doors are the only thing we do. That means when we look at your door, we’re not guessing. Our technicians have up to 14 years of experience across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems. Call (855) 658-4182 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most Broadview Park garage door repairs land between $150 and $600.
- A single torsion or extension spring runs $180 to $340. A matched pair usually gets replaced together, so a pair costs about twice that.
- New door installation is the biggest ticket at $700 to $2,200, depending on size, material, and insulation.
- Free estimates, and the written estimate is the price you pay.
Garage Door Cost Breakdown (2026)
Here’s what the main jobs cost in Broadview Park this year. These are typical estimated ranges for the local market, not quotes. Your written estimate will reflect your specific door, its condition, and the parts it needs.
| Service | Typical Estimated Range |
|---|---|
| Garage Door Repair (general) | $150 – $600 |
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2,200 |
What pushes a job toward the top of its range? A snapped spring usually means a pair, so budget roughly double the single-spring range. Older doors with rusted hinges and worn rollers often need several small fixes at once, and that adds up. Openers on smart-home systems like LiftMaster and Chamberlain myQ take a little more time to program correctly than a basic Genie or Craftsman unit, so install labor reflects that. What pulls a job toward the bottom? A single failed roller, a track that slipped out of alignment, or a remote that just needs re-pairing. Those are quick visits.
New door installation is its own category. A basic single-car steel door sits near the bottom of the $700 to $2,200 range. Double-car doors, insulated panels, carriage-house styles, and doors from Clopay, Amarr, Wayne Dalton, or Raynor with upgraded hardware all move toward the top. The written estimate accounts for the door size, the material, and whether the existing tracks and hardware can stay.
What Affects Garage Door Pricing in Broadview Park
Broadview Park is a small community just west of Fort Lauderdale, and the housing here shapes what a garage door job looks like. Plenty of homes have older single-car garages with original hardware, and that changes the math. Here’s what moves the number up or down.
- Door age and hardware condition. A door that’s been sitting through South Florida’s humid summers will often have rusted hinges, stretched cables, and worn rollers. When several parts fail together, the repair bill creeps toward the $600 end of the general repair range. One part failing on its own keeps you near $150.
- Brand and parts availability. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor every week. Knowing the specific tolerances of your system means fewer surprises and less time chasing the wrong part. A common opener repair stays around $120 to $320. A rare or discontinued panel is different, and we’ll tell you upfront if a match is hard to find.
- Spring type. Torsion springs and extension springs fail differently and are priced differently. Spring repair runs $180 to $340 for one spring. If your door uses a matched pair, which most do, both usually get replaced at the same time so the door stays balanced. That’s about twice the single-spring range.
- Opener technology. Smart openers with myQ integration and battery backup take more setup than a legacy unit. Installation runs $250 to $550 depending on the model and whether new wiring or safety sensors are needed. Repair on an existing opener is $120 to $320.
- Door size and material. A standard single-car door is the simplest install. A double-car door, an insulated door, or a carriage-style door with decorative hardware pushes installation toward $2,200. Material matters too: steel costs less than wood or composite.
- Damage extent. A dented bottom panel is a $250 to $500 fix. A door that came off its tracks after a hard impact may need track realignment ($120 to $240) plus panel work plus new rollers, and that combination lands higher. Hail is uncommon here, so most impact damage we see comes from vehicles, storms, or a door that got forced.
One more local factor: the afternoon thunderstorms that roll through Broward County in summer put real stress on doors and openers. A door that’s slightly out of balance or has a failing sensor will act up more in wet, humid weather. Getting a small problem fixed before storm season saves you from a bigger repair later. If your door is struggling now, call (855) 658-4182. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
How to Save on Garage Door Repair in Broadview Park
The best way to keep costs down is to catch problems early and fix them before they cascade. A worn roller is a $110 to $220 job. Ignore it and the door runs rough, wears the track, and stresses the opener. Now you’re looking at roller replacement plus track realignment plus opener repair.
- Fix small things first. A noisy door, a door that hesitates, or a remote that’s flaky are cheap fixes if you handle them early. Roller replacement ($110 to $220) and track realignment ($120 to $240) are the least expensive repairs on the list.
- Replace springs in pairs. It sounds counterintuitive, but replacing both springs at once costs less over time than replacing one, then paying for the second visit when the other fails. Spring repair is $180 to $340 per spring, and a pair is about double that.
- Repair the opener before replacing it. Opener repair is $120 to $320. Installation is $250 to $550. If the motor and logic board are sound, a repair is the smarter move. We’ll tell you honestly which one makes sense for your unit.
- Get a free estimate before you commit. We don’t charge for estimates, and the written estimate is the price. Call (855) 658-4182 and we’ll walk you through what your door needs.
- Ask about panel replacement instead of a whole new door. If the door’s frame, tracks, and springs are in good shape, a single panel replacement at $250 to $500 is far cheaper than a new install at $700 to $2,200.
We also want to flag the safety side of this. Garage door springs are under extreme tension, and a torsion spring or cable that’s handled without the right tools can cause serious injury. We don’t recommend DIY spring work, and we won’t walk you through it. That’s a job for a trained technician with the right winding bars and the right knowledge of your door’s balance. Same goes for any work around the opener’s electrical connections. If your door is stuck, unbalanced, or making a bang, call us instead of trying to force it.
FAQs – Garage Door Cost in Broadview Park
How much does garage door repair cost in Broadview Park?
Garage door repair in Broadview Park typically costs $150 to $600, depending on the part and how many issues are involved. A single roller or track fix sits near the bottom. A spring or cable job with related hardware sits higher. Call (855) 658-4182 for an exact quote. Estimates are free.
How much does spring repair cost in Broadview Park?
Spring repair runs $180 to $340 for one spring. A matched pair is usually replaced together, so a pair costs about twice that range. Spring work is one of the most safety-critical repairs on a garage door, so it’s not a job to attempt yourself. Call (855) 658-4182 and we’ll get your door balanced and working again.
Is it cheaper to repair or replace my garage door?
Repair is almost always cheaper unless the door’s structure is failing. A $250 to $500 panel replacement or a $150 to $600 general repair costs far less than a new install at $700 to $2,200. The exception is a door with a bent frame, rusted-through panels, and failing springs. At that point, replacement makes more sense. We’ll give you a straight answer. Call (855) 658-4182 for a free estimate.
Can you come today?
Same-day service is often available. We dispatch Sunday through Friday, 7am to 7pm, and we answer the phone 24/7. A call outside dispatch hours is booked into the next opening. If your door is stuck open, off its tracks, or your car is trapped inside, call (855) 658-4182 and we’ll get you scheduled.
How much does a new garage door cost in Broadview Park?
New door installation runs $700 to $2,200 for a typical residential door. Single-car steel doors sit near the bottom. Double-car doors, insulated panels, and carriage-house styles from Clopay, Amarr, Wayne Dalton, or Raynor move toward the top. The written estimate covers the door, hardware, and installation. Call (855) 658-4182 for a free estimate on your door.
Get a Free Estimate on Your Broadview Park Garage Door
Whether it’s a snapped spring, a dead opener, or a full door replacement, the price should be clear before anyone touches your door. We give free estimates, and the written estimate is the number you pay. One call covers it: repair, install, or emergency. We’re a garage door specialist, not a general handyman, and we work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems every week. No matter what’s on your garage, we’ve seen it and fixed it.
Call (855) 658-4182 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Your door back on track today starts with one phone call.
Pricing reflects the Broadview Park market as of 2026. Davie Garage Door Repair Pros offers free estimates – call (855) 658-4182.
Written by the team at Davie Garage Door Repair Pros.
What Our Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Ramon Mendoza"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Andres Hernandez"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Alma Vargas