Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateGenie Garage Door in Sunrise, FL
We provide independent Genie service across Sunrise, from opener repair and sensor calibration to full opener installation on the builder-grade steel doors that fill this city’s subdivisions. What makes our Genie work here different is repetition: the same drive systems appear on the same doors in the same neighborhoods, so we usually know what we’re walking into before we arrive. Genie makes chain-drive and belt-drive openers, remotes, keypads, and the safety sensors that keep a closing door from coming down on someone. We repair, install, and service all of it with quality parts that fit. Call (855) 658-4182. We answer 24/7, and fast dispatch runs from 7am to 7pm.
Why Sunrise Residents Choose Us for Genie Service
Some garages get a handyman who’s never opened a Genie housing before. That’s not us. Garages are the whole trade for us, and we work on Genie systems specifically, which means we recognize the difference between a stripped drive gear and a logic board that’s given up. Those two problems sound identical from the kitchen and cost very different amounts to fix.
Sunrise homeowners tend to want three things: a real diagnosis, parts that fit, and a price they agreed to before anyone touches the door. We can meet all three. Our technicians have up to 14 years of experience, and we’re factory-familiar with eight major brands, Genie included. When you call, we ask what the opener is doing and when it started, and we book a window that works around your day. The written estimate comes before the work, not after. Same-day service is available on many repairs, so a dead opener doesn’t have to run your week.
For more depth on how we handle the brand, see our Genie service overview, and for local coverage details, our Sunrise page.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Common Genie Garage Door Problems We Solve in Sunrise
- Stripped plastic drive gears on chain-drive units. An uninsulated west-facing garage in a Sunrise summer gets genuinely hot, and a chain-drive opener cycling several times a day grinds that plastic gear down over the years. What you hear is a motor running with a door that barely moves. The repair is replacing the gear, not the whole opener.
- Intellicode II logic boards that stop responding. Broward’s humidity and the small surges that come with storm season corrode board contacts, and suddenly remotes and keypads go dead at once. If everything stopped together, the board is the first place we look.
- Safety sensors that reverse the door for no reason. Salt air and afternoon sun cloud the lenses and knock the brackets slightly out of line, so the door starts reversing intermittently, usually at the same time of day. Calibration or replacement of the sensor pair fixes it.
- Belt tensioners and trolley carriers wearing out. The heavier builder-grade steel doors common in Sunrise put more load on a belt drive than a light modern door does. The result is clunking and jerky travel instead of a smooth glide.
- Doors that open partway and stop. Usually a limit setting that’s drifted or a worn roller binding in the track, not the opener itself. We check the door’s balance before we blame the motor.
Genie Service in Sunrise: What Local Conditions Mean for Your Equipment
Here’s the pattern we see across the retiree communities off Sunrise Lakes Drive and Sunrise Boulevard. The original 1980s steel doors are so uniform from house to house that a technician can often read the exact spring size and opener model from the driveway, without opening anything. That uniformity shapes how Genie work goes here. When the housing on one garage’s chain-drive unit cracks, the neighbor two doors down usually has the same opener at the same age with the same wear, and we start hearing from the block. Replacement waves follow a single failure.
It also means the diagnosis is faster and the advice is more honest. If a unit has a cracked housing and a board that’s already failed twice, we’ll show you the math on repair versus replacement instead of quietly selling you both. The salt-laden air off the coast speeds up corrosion on sensor brackets and track hardware, so we look at those on every visit. For a retiree who wants a quiet door and working safety sensors, a belt-drive swap often makes more sense than another round of gear replacements.
Genie Models & Products We Service in Sunrise
We service the Genie equipment that actually sits on Sunrise garage ceilings: chain-drive units, belt-drive units, and the smart-connected models. The names you’ll see on the housing include the Genie ChainMax 1000, the Genie SilentMax 750, and the Genie StealthDrive 750. We also handle Genie Intellicode II remotes and keypads, and the safety sensor pairs on every one of those systems.
On parts, we use OEM Genie gears, logic boards, and sensors when they’re available, and proven aftermarket belts, rollers, and hinges where they hold up better to South Florida humidity. We’re an independent shop. We’re not affiliated with or authorized by Genie, so our only stake in the recommendation is whether the part lasts.
See the difference
Before
After
Before
After
Before
AfterGenie Service Pricing in Sunrise
Prices below are typical estimated ranges for the work, and your written estimate sets the final number. The biggest cost drivers are whether the problem is a part swap or a full unit, and whether the door itself needs work alongside the opener.
| Service | Typical estimated range |
|---|---|
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Sensor Calibration | $120 – $240 |
| Spring Repair (one spring) | $180 – $340 |
| Garage Door Repair | $150 – $600 |
A matched pair of springs is usually replaced together, so a pair runs about twice the single-spring range. The free estimate covers checking the gear, testing the sensors, and confirming the door’s balance so the quote reflects the actual fault. We quote and agree the price before any work starts, so there’s no surprise on the invoice. Call (855) 658-4182 for an exact quote.
Serving Sunrise, FL – Our Local Coverage Area
We serve Sunrise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Genie Garage Door in Sunrise
On a chain-drive Genie unit, a motor that runs while the door stays put almost always means a stripped plastic drive gear. Heat and daily cycling wear the gear teeth down until the chain has nothing to grab. We open the housing, confirm the gear, and replace it if the rest of the unit is sound. Call (855) 658-4182 for an exact quote; estimates are free.
Afternoon sun and salt air are the usual culprits: the sensor lenses cloud or the brackets drift slightly out of line, and the door reverses when the beam breaks. It’s a calibration or replacement job, not a new opener. Call (855) 658-4182 and we’ll get the sensors lined up and tested.
Yes. A belt-drive Genie is a good fit for those heavier 1980s steel doors when the door is balanced and the spring is matched to the new unit’s pull. We check the spring, rollers, and hinges first so the opener isn’t fighting a door that needs its own repair. Installation is measured and scheduled, and the price is quoted in writing before we start.
Not always. A power event can wipe the Intellicode II memory, and re-pairing the remote and keypad often restores everything. If re-pairing fails and the wall button still works, the board is the next suspect and we test before recommending a replacement.
It depends on the housing and how many times the board has failed. A clean unit with one worn gear is worth repairing; a cracked housing with repeat board failures usually points to replacement. Genie opener repair in Sunrise runs $120 – $320 typical, and a new opener installation runs $250 – $550, so we compare the two honestly. Call (855) 658-4182 for a straight answer.
Service Areas Near Sunrise
We cover Genie service across Sunrise and the surrounding west Broward neighborhoods, including Plantation, Lauderhill, Davie, Cooper City, and the areas around Sawgrass. If you’re just over the line in one of them, call and we’ll confirm coverage before booking.
Book Your Genie Service in Sunrise Today
Whether it’s a grinding chain-drive unit, a sensor that reverses on its own, or a full belt-drive upgrade for a 1980s steel door, one call covers it. Same-day service is available on many repairs. Call (855) 658-4182. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. The estimate is free.
Written by the team at Davie Garage Door Repair Pros.