Full-view glass
Raised-panel steel
Carriage house
Modern flush
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Broadview Park
Broadview Park is a small unincorporated pocket of Broward County just west of Fort Lauderdale, and the homes here mostly predate the hurricane-rated two-car era. That changes how a new door gets installed. We install garage doors throughout Broadview Park with an eye on the older single-story block ranches, the narrow openings, and the aging headers that make each job its own puzzle. Our technicians have up to 14 years of experience, and we’ve learned the specific quirks of mid-century Broward garages. Call (855) 658-4182 for a free on-site estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Broadview Park Homeowners Call Davie Garage Door Repair Pros for Garage Door Installation
We serve Broadview Park, FL regularly, and that matters because the housing stock here doesn’t behave like the newer subdivisions further out. Installers who only hang doors in new construction get thrown by a 1950s concrete-block garage with a shallow header and an 8- to 9-foot opening. We don’t.
Our technicians have up to 14 years of experience working on older residential doors and openers, including the legacy hardware still on dozens of homes in Broadview Park. We’re factory-familiar with the major brands – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor – so we can match or modernize whatever system you have. We don’t subcontract. The specialist who measures your opening is the specialist who installs the door.
Response time to Broadview Park is quick because it sits right next to our primary service area in Davie, just a few miles south and west. Same-day service is available for repair calls, and new-door installations get a free measure and a written price before anyone lifts a tool. No guesswork, no second company. One call covers it – install, repair, or emergency.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Broadview Park
Every garage door installation in Broadview Park starts with a real measurement of the opening, not a catalog number. Here’s what we handle.
New Door Installation in Broadview Park
A full new door installation in Broadview Park means a wind-rated, permitted replacement sized to your actual opening – and on these older garages, that often means reinforcing the tracks and anchoring to meet Broward County’s post-Andrew wind-load requirements. We measure the header, check for sag and square, and spec the door to fit. We bring the same care to our broader garage door installation work across South Florida.
Single Car Door Installation in Broadview Park
Most of Broadview Park’s attached garages are single-car bays with narrow 8- to 9-foot openings, and many still have their original wood or early steel sectional doors. A single-car replacement runs $700-$1,500 typical, depending on material and whether the opening needs re-framing. We fit the door to the real opening, not an assumption.
Double Car Door Installation in Broadview Park
Where a property has been added onto or a wider opening was built, a two-car door can go in – but only after we verify the header and anchoring can carry the wider load and wind rating. We won’t hang a wide door on a header that won’t hold it. Better to know up front and build it right.
Custom Garage Door in Broadview Park
Some Broadview Park homeowners want the door to match the house again – a wood-look finish or a panel style that fits the mid-century block ranch. A custom door lets us match the opening and the look while meeting wind-load rules. If the header needs work, that’s part of the conversation from the first visit.
Trusted Brands We Service in Broadview Park
We work on Amarr, Wayne Dalton, Craftsman and Raynor systems specifically, because we’ve seen how each one fails and what a smart replacement looks like. We don’t claim to stock parts on a truck – parts are ordered to fit your door and opening. What you get is factory-familiar knowledge: we know the tolerances and the sizing quirks of each brand so your new door hangs right the first time. Whether you’re replacing a legacy Craftsman opener or upgrading to a Raynor sectional, we order what fits. No paperwork shuffle, no guesswork.

See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Installation Problems We See in Broadview Park Homes
Broadview Park isn’t a new-build town, and the problems reflect that. Here’s what we routinely find:
- Exhausted legacy springs on 40-60 year old doors. Original torsion or extension spring hardware runs out of cycles and the opener strains to compensate. The fix is spring and cable replacement, not a new motor. This is one of the most common reasons a door “won’t open right.”
- Salt-laden coastal air rusting early steel and degrading lubricant. Broadview Park sits only a few miles from the coast, so rust blooms on early steel panels and seizes rollers and springs. Doors lose balance and grind long before the panels fail outright.
- Shallow cast-in block headers that sag or crack. In these concrete-block garages, the header is often just a few courses of block over the opening. When it sags or cracks, the opening goes out of square and a door swap turns into a structural re-frame plus wind-load permitting.
- Narrow 8- to 9-foot openings that off-the-rack doors don’t fit. Standard “one-size” doors need modification to seat on these older openings. We spec to the real measurement so the door actually closes square and seals.
Pricing for Garage Door Installation in Broadview Park, FL
A typical new door installation in Broadview Park runs $700-$2,200 estimated, and that final number depends on material, size, and whether the opening needs re-framing. The written estimate sets the final price. We quote the work and agree on it before anyone starts, so the invoice won’t surprise you later. If the header needs attention, we tell you during the measure, not after the door is delivered. Here are typical estimated ranges for the work most Broadview Park homeowners ask about:
| Service | Typical Estimated Range |
|---|---|
| New Door Installation | $700-$2,200 |
| Single Car Door | $700-$1,500 |
| Garage Door Repair | $150-$600 |
| Panel Replacement | $250-$500 |
| Track Realignment | $120-$240 |
| Opener Installation | $250-$550 |
Estimates are free. Call (855) 658-4182 to book a measure.
We Also Serve Cities Near Broadview Park
Our work reaches throughout this part of Broward, including Plantation, Lauderhill, Boulevard Gardens and Franklin Park. If you’re just over the line from our Broadview Park coverage, we can still get you a free measure and estimate. Same brand-familiar technicians, same upfront pricing, one call covers it.
Serving Broadview Park, FL – Our Local Coverage Area
We serve Broadview Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Broadview Park
You often can, but only after the opening is measured and checked for sag and square. In Broadview Park’s concrete-block garages, the header is frequently just a few courses of block over the opening, and 40-60 year old wood doors have often warped or shifted the frame over time. We check the header and anchoring during the measure. If it’s solid and square, the replacement goes in without re-framing. If it’s sagging or out of square, we tell you before ordering the door and price the re-frame as part of the job. Call (855) 658-4182 for a free measure – estimates are free.
Yes. Any replacement door in Broadview Park must be wind-rated and permitted to meet Broward County’s post-Andrew wind-load requirements for this opening, not just the door itself. That means the door and its anchoring are engineered to the actual opening, and we confirm the permit requirements with the city’s building department before we install. This is why a “simple” swap on an older garage can turn into structural work – the opening has to carry the load, not just the panel.
Usually replace it during the install, especially on a legacy Craftsman or Genie unit still running on a 40-60 year old door. An old opener that’s been straining against exhausted springs is near the end of its life, and pairing a new wind-rated door with a tired motor means you’ll be back on the phone soon. New opener installation runs $250-$550 typical. A LiftMaster or Chamberlain system pairs cleanly with a new door. Call (855) 658-4182 to talk through both options.
Repair makes sense when the panels are sound and the door just needs springs, cables or tracks – a typical repair runs $150-$600. Replacement makes sense when the panels are rusted through from salt air, the wood has warped beyond indexing, or the opening itself needs re-framing. We look at the hardware, the balance, and the header, then tell you plainly which way makes sense for your garage. It’s not a sales call. Call (855) 658-4182 for an honest assessment.
Ask what cycle rating the springs carry and confirm the installer matches them to the new door’s weight, not the old door’s. Galvanized or oil-tempered springs hold up longer against Broadview Park’s salt air, and the spring balance is what decides how hard your opener has to work. High-tension torsion and extension springs are dangerous to open up, so leave spring replacement to a trained professional. A dedicated spring repair runs $180-$340 typical for one spring; a matched pair is usually replaced together and costs about twice that. Call (855) 658-4182 with questions before the install.
If your Broadview Park garage door is past its service life or the opening needs a fresh look, we’re ready to help. Call (855) 658-4182 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The price is quoted and agreed before any work starts.
Written by the team at Davie Garage Door Repair Pros.