Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Franklin Park?
Garage door repair in Franklin Park typically costs $150 – $600 depending on the part and how much of the system is worn. A single spring replacement runs $180 – $340, cable repair is $130 – $250, and a complete new door with installation falls in the $700 – $2200 range. Every job is priced by a written estimate before any work starts, and that written estimate sets the final price.
Franklin Park is a small, closely built community, and most of the homes here have a driveway that feeds straight into the garage. When that door stops working, the house has no working vehicle entrance and no way to close up securely. That’s the failure we hear about most, and it’s why a clear price picture up front matters more than a sales pitch. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, so when we arrive we already know the tolerances and the parts inside your door or opener. One call covers it: repair, install, or emergency. Estimates are free, and we answer 24/7 at (855) 658-4182.
Key Takeaways
- Most Franklin Park garage door repairs land between $150 and $600, parts and labor included.
- Springs are priced per spring: $180 – $340 for one, and a matched pair usually costs about twice that because both springs get replaced together.
- A full new door installed runs $700 – $2200, with steel single-car doors at the low end and insulated double-car doors higher.
- Opener work ranges from $120 – $320 to repair versus $250 – $550 to install a new unit.
- The estimate is free, the price is set per job, and the written quote you get is the price you agree to.
Garage Door Cost Breakdown (2026)
Here are the typical estimated ranges for garage door work in Franklin Park. These are ranges, not quotes. What you’ll actually pay depends on your door’s size, its brand, and whether the problem is mechanical or electrical. The written estimate you receive before work begins sets the final price.
| Service | Typical Estimated Cost | What It Covers |
|---|---|---|
| Garage door repair (general) | $150 – $600 | Diagnosis and fix of the failed component, from a jammed door to a bent section |
| Spring repair or replacement | $180 – $340 per spring | One torsion or extension spring, replaced with a matched part |
| Cable repair | $130 – $250 | Frayed or snapped lift cable, including re-tensioning |
| Opener repair | $120 – $320 | Logic board, gear, belt, chain, or sensor faults |
| Opener installation | $250 – $550 | New opener unit, rail, and hardware installed and tested |
| Panel replacement | $250 – $500 | One damaged section swapped for a matching panel |
| Track realignment | $120 – $240 | Bent or knocked-out track straightened or replaced |
| Roller replacement | $110 – $220 | Set of rollers replaced to quiet the door and restore smooth travel |
| New door installation | $700 – $2200 | Complete door, tracks, springs, and hardware installed |
What drives a price toward one end of the range or the other?
Springs are the biggest single variable. A torsion system with one spring is the straightforward version. A matched pair of springs, which is what most two-car doors use and what we usually replace together, typically costs about twice the single-spring range because both springs get replaced at once. Going down to one new spring on a pair that were installed together just means the older one fails soon after.
Door size and material move the installation range more than anything else. A single-car steel door sits near the $700 end. A double-car insulated door with windows and a factory finish climbs toward $2200. Panel replacement follows the same logic: a standard stamped steel panel is cheaper than a carriage-style or wood-grain injected panel that has to be ordered to match.
Opener prices split cleanly between repair and replacement. If the logic board, gear, or sensor is at fault, repair at $120 – $320 makes sense. If the unit is a legacy Craftsman that’s out of parts, or the motor itself is failing, a new opener installed at $250 – $550 is the better spend. On smart-home integrated units like LiftMaster and Chamberlain with the myQ ecosystem, we can often repair rather than replace because the electronics are the part that fails, not the motor.
What Affects Garage Door Pricing in Franklin Park
- Brand and part availability. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors and openers. A common brand means a common part, and that keeps the job near the middle of the range. An older Raynor door with a discontinued track profile may need a matching part ordered, which pushes cost up.
- How many springs are actually involved. A door with one torsion spring is priced once. A door with a matched pair is priced as a pair. It’s the most common place a Franklin Park homeowner is surprised, so we always explain it before the work starts.
- Whether it’s a repair or a replacement. A bent track, a rough roller, and a tightened cable are all fixable in the $110 – $250 band. A door with a cracked bottom panel, a sagging top section, and worn springs is often cheaper to replace at $700 – $2200 than to piece back together.
- Door weight and construction. A heavier insulated door needs heavier springs and sturdier hardware. That raises the spring cost within the range and matters at installation time. Franklin Park’s heat and humidity also affect wood and wood-composite doors more than steel, especially when a door faces the afternoon sun.
- Opener age and type. Chain-drive openers with a worn gear are cheap to fix. A smart opener with a failed logic board may be a $250 – $550 replacement. Legacy Genie and Craftsman systems sometimes need a part that’s no longer stocked, which points toward replacement.
- Safety sensor and wiring condition. A door that reverses on the way down isn’t always a spring problem. Misaligned or moisture-damaged sensors add a small amount of diagnosis time, and it’s worth getting right because the door won’t stay closed safely without it.
How to Save on Garage Door Cost in Franklin Park
There’s no coupon for a garage door. The savings come from catching a problem before it multiplies and from staying away from parts-house guesswork.
- Fix a cable or roller before it takes the spring with it. A frayed cable that runs for weeks will eventually rub the drum or let the door drop unevenly. A $130 – $250 cable repair is cheaper than a spring and cable job combined.
- Replace both springs when one fails. It sounds like spending more, but the two springs were installed together and have the same cycle count. Replacing one and waiting for the second is the more expensive path.
- Repair the opener instead of replacing it when the motor is fine. A lot of openers come back to life for $120 – $320. If the motor is strong and the gear is worn, repair is the cheaper call.
- Match the panel instead of the door. One damaged section doesn’t mean a new door. Panel replacement at $250 – $500 keeps the rest of a healthy door in service.
- Ask for the written estimate before work starts. A free estimate costs nothing and lets you compare a repair against a replacement with both numbers in front of you.
For a free estimate, call (855) 658-4182. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 14 years of experience, and the local pro we connect you with is licensed and insured as their state requires. For a look at the full range of what we handle, start at Davie Garage Door Repair Pros.
When Does a Repair Beat a Replacement in Franklin Park?
A repair usually beats a replacement when the door’s panels, tracks, and hardware are still sound and only one or two parts have failed. If the door is heavy, crooked, and cracking at the bottom panel too, replacement at $700 – $2200 is often the better spend.
Here’s the plain way we think about it. Springs, cables, rollers, and openers are consumable parts. They wear out at the end of a service life, regardless of the door behind them. Replacing a spring on a solid door at $180 – $340 buys the door another full service life. Replacing a spring on a door with a rusted-through bottom panel, bent tracks, and a sagging top section is money spent on a door that’s going to be replaced within a year or two anyway. If the door’s structure is healthy, repair wins. If the structure has failed, replacement wins.
Panel replacement is the middle ground, at $250 – $500. When a single section takes impact damage – a car bumper, a wayward ball, a storm – and the rest of the door is fine, a matching panel is the cheap fix. On carriage-style Clopay or Amarr doors, the panel often has to be ordered to match the factory profile, and that’s worth knowing before you agree to a number.
Can You Fix a Garage Door the Same Day in Franklin Park?
Yes. Most garage door repairs in Franklin Park are resolved on our first visit, because the parts that fail most often are the parts we’re ready for. Springs, cables, openers, and track alignment are the bulk of what we do, and we know the brand tolerances before we arrive.
When you call, we ask what the door is doing. A door that won’t close, a door that reverses, a door that goes up halfway and stops, an opener that clicks without moving. Each answer points toward a different failure, and that tells us what to be ready for. Fast dispatch from 7am to 7pm, Sunday through Friday. If the door fails outside those hours, call anyway. We answer 24/7, and we’ll book you into the next opening.
Emergency response is part of what we do. It’s not a callback two days out, and it’s not something we charge a premium to unlock. A broken spring, a door stuck open, or a door that won’t close is treated the same way we treat any other repair: diagnosed, priced, and fixed. For a jammed door, a snapped cable, or a bent track, see our emergency garage door service page to start the call.
What Do Garage Door Springs Cost in Franklin Park?
Garage door spring repair in Franklin Park costs $180 – $340 for one spring, and a matched pair typically costs about twice that because both springs are replaced together. Torsion springs run across the top of the door; extension springs run along the tracks. Both are under heavy tension, and both are the most dangerous part of the door to work on.
That’s the reason spring work isn’t a place to save a few dollars. A spring under tension is coiled steel stored with enough force to move a door that weighs hundreds of pounds. Loosening or tightening it requires the right winding bars, the right technique, and the right count of turns for the door’s weight and height. We treat spring replacement as its own specialty because it is one. If your door is stuck, or the springs look stretched, sagging, or broken, don’t try to force the door. Springs, cables, and the brackets that hold them should only be handled by a trained technician. Call us and we’ll take it from there.
Our spring repair page covers torsion versus extension systems in more detail. For the full picture, we handle spring repair as part of our garage door repair service and can also walk you through a garage door cost guide if you’d like more numbers.
Opener Costs: Repair vs Replace
Opener repair runs $120 – $320 in Franklin Park. A new opener installed is $250 – $550. The deciding factor is usually the motor: if the motor is strong and only the gear, belt, sensor, or logic board has failed, repair is cheaper. If the motor is failing or the unit is a legacy model that’s out of parts, replacement is the better call.
We work on both smart and legacy openers. LiftMaster and Chamberlain with the myQ ecosystem, along with Genie, Craftsman, and Raynor, are all openers we know. Smart openers have their own failure patterns: the logic board and the Wi-Fi module are what fail first, not the motor. Legacy units are usually mechanical: a worn gear, a stretched chain, a failing capacitor. Knowing which one you have changes the price. Learn more on our opener repair page, or read about opener installation if you’re ready for a new unit.
Panel and Track Costs
Panel replacement is $250 – $500, and track realignment is $120 – $240. Both are among the cheaper repairs, and both are often the fix a homeowner was sure was a full-door problem. A door that looks bent often has one track knocked out of plumb. A door that looks cracked often has one panel that took impact.
Roller replacement at $110 – $220 is the quiet fix. A noisy, rumbling door is usually worn steel rollers or a roller with a flat spot. Steel rollers wear into the track over time; nylon rollers run quieter. Replacing them restores smooth travel and gets rid of noise that gets blamed on the opener. Because Franklin Park homes are close to the street and each other, a door that rumbles at 7am is also a door your neighbors hear. Our panel replacement and track repair pages cover both jobs.
New Garage Door Installation Cost in Franklin Park
A new garage door installed in Franklin Park typically costs $700 – $2200. The number moves on door size and material: a single-car steel door sits near $700, and a double-car insulated door with windows and a factory finish approaches $2200. Installation includes the door, tracks, springs, hardware, and adjustment.
Door choice drives the price more than the install itself. Steel is the standard for most homes here: it holds up to the heat, doesn’t need refinishing, and comes in standard widths. Insulated steel sits higher in the range because it’s heavier and needs stronger springs. Carriage-style doors with decorative hardware sit higher still. Wood and wood-composite doors cost more and need more upkeep in a humid climate. If you’re choosing, start with our garage door installation page. And if one side of a two-door garage is being replaced, the other side is worth checking at the same time; mismatched cycle counts on springs and openers cause uneven wear.
Neighborhoods We Cover Around Franklin Park
Franklin Park is a small Broward County community, and we connect homeowners here with local garage door professionals who know the housing around it. If you’re in one of the nearby cities, the same pricing applies, and the same team can help. Our Davie page covers our largest nearby market, and we also work throughout Cooper City, Plantation, Sunrise, Hollywood, Pembroke Pines, Fort Lauderdale, and Weston. Franklin Park sits in the middle of that map, so dispatch from any direction is straightforward.
FAQs – Garage Door Cost
How much does garage door repair cost in Franklin Park?
Garage door repair in Franklin Park typically costs $150 – $600, depending on the part and the door. Springs at $180 – $340 and cables at $130 – $250 are common jobs in that range. Call (855) 658-4182 for an exact quote – estimates are free.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper when the door’s structure is sound: a $180 – $340 spring job versus $700 – $2200 for a new door. Replacement makes sense when the panels are rusted, the tracks are bent, and the door is sagging. Call (855) 658-4182 and we’ll tell you which one your door needs – the estimate is free.
How much does garage door spring repair cost in Franklin Park?
Spring repair costs $180 – $340 for one spring. A matched pair usually costs about twice that, because both springs are replaced together. Call (855) 658-4182 for an exact quote – the estimate is free.
Can you come today?
Yes. Same-day service is available for most Franklin Park garage door repairs. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (855) 658-4182 to book an opening.
How much does a new garage door cost installed in Franklin Park?
A new garage door installed in Franklin Park runs $700 – $2200, depending on size, material, and insulation. A single-car steel door is near $700; a double-car insulated door approaches $2200. Call (855) 658-4182 for an exact quote – estimates are free.
Talk to Us About Your Door
If your garage door is making a sound it shouldn’t, failing to close, or just worn out, the fastest way to get a real number is a call. Tell us the door and the brand. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems specifically, and we’ll tell you what’s likely wrong and what it will take to fix.
Call (855) 658-4182 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Whether it’s a spring, a cable, an opener, or a whole new door, one call covers it, and the written estimate is the price you’ll pay.
Pricing reflects the Franklin Park market as of 2026. Davie Garage Door Repair Pros offers free estimates – call (855) 658-4182.
Written by the team at Davie Garage Door Repair Pros.
What Our Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Ramon Mendoza"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Andres Hernandez"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Alma Vargas