Last updated November 21, 2026
Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateGarage Door Cost Breakdown: The Davie Homeowner’s Reference for 2026
National cost guides will tell you a garage door replacement runs $1,100 to $1,300. In Davie, a compliant replacement with wind-rated hardware and a pulled permit usually lands closer to $1,600 to $2,200. That gap surprises homeowners at the estimate table, and the usual assumption is that a local contractor has inflated the number. It’s not markup. It’s Florida Product Approval door ratings, hurricane-rated track and hardware, a real permit through Broward County, and debris hauling – the parts most online references simply leave out. This guide breaks the whole price apart line by line, so you walk into a Davie estimate knowing what each figure covers and which quotes are quietly missing something.
Quick Answer
A garage door replacement in Davie typically costs $1,600 to $2,200 for a permitted, wind-rated single door, including the door, hurricane hardware, labor, permit and disposal. Spring repair usually runs $180 to $340 for one spring, opener replacement is often $350 to $850 installed, and a straight repair like rollers, cables or a bent track is usually $120 to $400. The written estimate you receive sets the final price, and it’s quoted before any work starts.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Table of Contents
- Line-by-line cost breakdown for a Davie garage door
- Why Florida Product Approval doors cost $200 to $500 more
- Steel vs. aluminum vs. fiberglass in a humid climate
- What common repairs cost in Davie
- How to spot a low quote that cut corners
- Financing, insurance and documentation
- Common mistakes to avoid
- When to call a professional
Line-by-line: What a New Garage Door Actually Costs in Davie
A single blended average hides where the money goes. When the estimate is separated into its parts, the homeowner can see exactly what they’re paying for and question anything that looks off. This is the structure we walk through on a typical replacement in Davie, and it’s the same structure you should expect from any quote you receive.
| Line item | Typical Davie range | What it covers |
|---|---|---|
| Door panel / slab | $600 – $1,000 | Single-car steel door, insulated or non-insulated, rated for wind exposure |
| Hurricane-rated hardware | $150 – $300 | Rated hinges, rollers, struts and brackets matched to the door system |
| Track and spring system | $180 – $400 | Reinforced track and matched torsion or extension springs sized for the door weight |
| Labor | $300 – $500 | Removal of the old door, alignment, balancing and testing |
| Permit | varies by scope | Pulled through Broward County for a compliant installation |
| Disposal | $75 – $150 | Hauling away the old door and packing material |
| Opener (if replaced) | $350 – $850 installed | Belt or chain drive, smart or standard |
For a two-car door, expect the door and hardware lines to sit near the top of the ranges or above. The labor figure doesn’t scale quite as steeply because the setup time is similar, but the heavier panel and higher spring capacity do push it up.
Why the permit matters here: an unpermitted installation is still an installation, but it isn’t a compliant one. If you ever sell the home, an inspector can flag an unpermitted door, and the buyer’s lender can hold up closing while it gets sorted out. That’s the hidden cost of the low quote that skips the paperwork.
Why Florida Product Approval Doors Cost $200 to $500 More
Two doors can look identical on the showroom floor and carry a $300 price difference. The difference is the rating. A Florida Product Approval door has been tested to a specific design pressure for wind loads, and the paperwork that comes with it proves the testing was done. In Broward County, that rating isn’t optional for a new installation – it’s the baseline.
The $200 to $500 delta between a rated door and a visually identical non-rated door goes toward a few things:
- Heavier-gauge steel or reinforced panel construction that holds up under pressure differentials.
- Reinforcement struts and rated hardware designed as a matched system, not a mix-and-match collection.
- Tested assembly documentation, which the manufacturer supplies and the installer must be able to produce.
- Higher spring capacity to carry the extra weight of the reinforced door.
When a quote comes in low in Davie, ask one question: “Is this door Florida Product Approval rated, and can you show me the approval document?” If the answer is vague, the door is probably not rated, and the installation won’t pass inspection. That’s not a decision about price – it’s a decision about whether the work is legal.
We work with Clopay and Amarr rated lines, and the rated hardware that comes with them, because these are systems the manufacturers have already documented for Florida. That documentation is what makes the permit straightforward. Our team works on these brands specifically, and the paperwork trail is part of the job.
Steel vs. Aluminum vs. Fiberglass: The 10-Year Cost View
The sticker price is only the first number. The cost you actually feel over ten years includes maintenance, repair frequency and how the door handles Davie’s humidity and sun. Here’s how the three main residential materials compare when you price in maintenance over a decade.
Steel
Steel doors run $600 to $1,000 for a single in Davie and hold up well in most residential settings. The weak points are scratches and seams – once the paint layer breaks, humidity gets in and rust starts. Budget for occasional touch-ups and a repaint or re-seal somewhere in the ten-year span. Insulated steel panels also help keep the garage cooler, which matters for attached garages that share a wall with the living space.
Aluminum
Aluminum doors cost roughly the same or slightly more at the entry level, and they’re lighter, which puts less strain on springs and the opener. The trade-off is denting – aluminum is softer than steel and a stray ball or a bicycle handle can leave a mark. For homes where the door faces a driveway with active kids and constant traffic, that’s a real consideration. On the plus side, aluminum doesn’t rust the way steel does, which keeps maintenance simpler in a humid climate.
Fiberglass
Fiberglass is the lightest option and typically the cheapest up front. It won’t rust, but it can craze and fade under constant UV exposure, and the surface finish doesn’t hold paint as long as metal does. In a ten-year window, fiberglass often needs a refinish or a panel replacement that eats into the initial savings.
The practical takeaway
For most Davie homes with an attached garage, insulated steel with rated hardware is the balance point – the lowest long-term cost once repainting is factored in. Fiberglass makes sense for a detached garage or a low-traffic door where the lighter weight is an advantage. Aluminum fits a modern look and a homeowner who accepts it will show dents over time.
What Common Garage Door Repairs Cost in Davie
Not every problem needs a new door. Most service calls we handle in Davie are repairs, and the price ranges are wide enough that a homeowner should always get the estimate in writing before the technician starts.
| Repair | Typical range |
|---|---|
| Spring replacement (one spring) | $180 – $340 |
| Spring replacement (matched pair) | about twice the single-spring price |
| Opener replacement, installed | $350 – $850 |
| Opener repair (board, gear, sensor, remote) | $120 – $350 |
| Cable, roller or hinge replacement | $120 – $300 |
| Panel replacement | $200 – $600 depending on panel and finish |
| Track realignment or replacement | $150 – $450 |
Springs are quoted per spring rather than per pair because a door with two springs is sometimes rebuilt with a matched pair and sometimes with a single replacement depending on the wear pattern. A matched pair usually costs about twice the single-spring price. Ask which is happening on your door and why.
The reason spring work gets a dedicated service line is safety. A torsion spring under load stores enough energy to cause serious injury, and a homeowner trying to wind one by hand is taking a real risk. Extension springs have their own failure mode – they can let go with force. Either system needs a trained technician with the right winding bars and the door secured before anything is touched. We won’t talk a homeowner through a spring replacement over the phone, and no reputable company should.
How to Tell a Low Quote From a Cut-Corner Quote
A genuinely competitive estimate is possible. A quote that’s $600 under everything else is not efficient – it usually means something has been removed. Here’s a five-step check you can run on any proposal before signing.
- Ask for the door’s Florida Product Approval number. If the quote can’t provide it, the door isn’t rated. In Broward County, that’s the line between compliant and not.
- Check whether the permit is included. A line for permit fees is a sign the proposal is honest. A proposal with no permit line is either an oversight or a plan to skip it.
- Look at the hardware list. Rated hinges, struts and brackets should be spelled out. If the hardware is described only as “standard,” ask for the specification.
- Confirm the opener by model. A smart LiftMaster or Chamberlain opener has a specific model number and app compatibility. A quote that says “new opener” without a model isn’t a quote – it’s a placeholder.
- Ask who performs the work. The technician installing the door should be experienced with the specific system, not learning on your home. Our technicians have up to 14 years of experience, and we’ll tell you which brands they work on every week.
The other side of the low-quote question is disposal. Some quotes leave the old door in the driveway for the homeowner to deal with, and a garage door panel is not something that fits in a standard trash bin. Disposal should be a line item, not a surprise.
Financing, Insurance and Permit Documentation
Two questions come up on nearly every estimate: can this be financed, and will insurance pay for it. They’re separate answers.
Financing
Garage door replacement is a planned expense for most homeowners, not an emergency. If the timing doesn’t fit the budget, ask the company about financing options directly – the answer varies by provider, and it’s better to ask before the day of the install than after. What we can tell you is that the written estimate is the number to compare against the financing terms. Don’t finance a quote you haven’t read line by line.
Insurance
Homeowners sometimes assume a failing garage door is an insurance claim. It usually isn’t. Wear and tear, age and mechanical failure are maintenance problems, and standard policies don’t cover them. Where insurance does sometimes apply is a covered event – a storm, a vehicle impact or another sudden incident that damages the door.
If you’re filing a claim, the documentation matters. That’s typically:
- Photos of the damage from multiple angles, taken before anything is moved.
- The date and cause of the incident, if you know it.
- The written estimate from the repair company, broken out by part and labor.
- The Florida Product Approval documentation for any door being replaced, so the adjuster can match the scope to a compliant replacement.
We can work with your insurer on the documentation. The adjuster’s final call is theirs. What we can do is supply the estimate and the product documentation in the format the claim needs.
How to Compare Two Garage Door Estimates Fairly
Comparing estimates is harder than it sounds because companies structure them differently. One proposal is a paragraph, another is a spreadsheet. Here’s how to put them on the same footing.
Start by matching the door. If one quote lists a specific model and the other says “steel door,” you’re comparing a known quantity to an unknown one. Ask for the model and the rating on both, then compare. Model numbers exist for a reason, and a company that can’t name the product hasn’t committed to it.
Next, compare the hardware. The door slab is the visible part, but the track, rollers, springs and hinges are what determines how long it lasts. A quote that upgrades the door and leaves standard hardware is asking the heavier panel to sit on weaker components. That’s a recipe for a spring failure inside the first few years.
Then compare the opener. LiftMaster and Chamberlain are the two most common smart-home integrated openers in Davie homes, with Genie and Craftsman filling out most of the rest. If one quote includes an opener and the other doesn’t, you’re not comparing the same job. Ask whether the current opener can safely lift the new door – a heavier rated panel can overwork an older opener, and the opener will fail.
Finally, compare the paperwork. A Davie estimate that includes the permit, the product approval documentation and the disposal is complete. One that mentions none of those three is asking you to assume. Don’t assume.
What Changes the Price Most in Davie
Two doors in the same neighborhood can get quotes $500 apart. The variables aren’t random:
- Door size. A single-car door and a two-car door share labor but not material. The door and hardware lines rise with size.
- Insulation. An insulated door costs more up front but reduces heat transfer into an attached garage. For a garage under living space or sharing a wall with a bedroom, that matters.
- Openers and smart features. A basic chain-drive opener and a smart garage opener with app control and battery backup sit at opposite ends of the range. A garage door opener repair is often the cheaper choice if the existing unit is sound.
- Track and ceiling conditions. A low-clearance ceiling needs a specific track configuration. An older home with nonstandard framing may need extra fitting time.
- Permit scope. A like-for-like replacement moves through the county faster than a change in size or track configuration, which affects the inspection timeline.
If the door is repairable, the repair is usually the lower-cost path. We’ll tell you when it isn’t. The estimate you get from us is quoted and agreed before any work begins, so the number on the written estimate is the number you pay.
See the difference
Before
After
Before
After
Before
AfterCommon Mistakes to Avoid
- Trusting a national cost guide as a Davie budget. The national averages for garage door replacement leave out Florida Product Approval and permits. Start your budget at $1,600 to $2,200 for a compliant single door in Davie, not $1,100.
- Choosing the lowest bid without checking the door rating. A non-rated door looks the same on the outside. The approval document is the difference, and an unrated installation can fail inspection and hold up a home sale later.
- Skipping the permit to save time. An unpermitted door is a compliance problem you inherit. Ask any company in Davie to confirm the permit is part of the job before you sign.
- Replacing the door and keeping the old opener. A heavier rated door can exceed the lifting capacity of an older opener. When the door is replaced, have the opener checked – a LiftMaster or Chamberlain unit that’s undersized for the new door will fail sooner than it should.
- Assuming insurance covers mechanical failure. A worn spring or a failing opener is maintenance. Insurance claims are for sudden, covered events. Check with your insurer about the policy language before assuming a claim exists.
- Comparing one-line quotes to detailed quotes. A one-line quote and a line-item quote aren’t comparable. Ask both companies for the door model, the hardware specification, the opener model and whether the permit and disposal are included.
- Trying to handle a spring replacement yourself. A torsion or extension spring under load can cause serious injury. It’s the one repair on the door that should always go to a trained technician with the right tools.
When to Call a Professional
Some issues can wait for a scheduled visit. Others shouldn’t. Call a specialist when you hear a loud bang from the garage and the door won’t lift – that’s usually a broken spring, and the door should stay down until it’s serviced. Call when the door comes down unevenly, when the opener runs but the door doesn’t move, or when a cable has come off the drum. Call when a car has bumped the door or a storm has shifted a track. Don’t call for a noisy roller or a remote that needs a new battery – though we’ll help with those too.
The safety line is the spring and cable system. If you’re not sure what’s wrong, keep the door closed and let a technician look at it. Our garage door repair service covers the full diagnosis, and if the opener is the problem, garage door opener repair handles LiftMaster, Chamberlain, Genie and Craftsman systems. For a door that’s beyond repair, garage door installation covers the replacement from measure through inspection.
Davie Garage Door Repair Pros offers free estimates in Davie – call (855) 658-4182. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If your door has failed outside those dispatch hours, call and we’ll book you into the next opening.
Frequently Asked Questions
A compliant single-door replacement in Davie typically runs $1,600 to $2,200, including the door, hurricane-rated hardware, labor, permit and disposal. A two-car door sits higher. The number most national guides cite is lower because it leaves out the Florida Product Approval rating and the permit. Call (855) 658-4182 for an exact quote – estimates are free.
The difference is material and legal requirement, not markup. Broward County requires a compliant, wind-rated installation, which means a Florida Product Approval door and matched hardware that cost $200 to $500 more than a non-rated equivalent, plus a real permit. A quote that matches the national average in Davie is usually a quote for a non-compliant door.
Spring replacement in Davie typically costs $180 to $340 for one spring. A matched pair usually runs about twice that, since both springs are replaced together. The exact figure depends on the spring size and access. Call (855) 658-4182 for an exact quote – estimates are free.
Usually not for wear and tear. Standard policies typically cover sudden covered events like storm or vehicle damage, not mechanical failure or age. If you’re filing a claim, the estimate and the door’s product approval documentation are the paperwork the adjuster needs. We can supply both, and we can work with your insurer on the documentation.
For repair and emergency work, we can often get to a Davie door the same day. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Replacement work is measured, ordered and scheduled – that’s a different timeline. Call (855) 658-4182 and we’ll tell you which applies to your door.
The local professional we connect you with is state-licensed and insured as Florida requires. Our technicians have up to 14 years of experience, and we work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor systems specifically. For questions about credentials on your job, ask when you call (855) 658-4182.
Most single-door installations are completed in a day once the door is on site. The full timeline is usually measure first, order next, install and then inspection. The inspection is part of the permit process, and the county schedules it. We’ll walk you through the timeline for your specific door at the estimate.
The Bottom Line
Garage door pricing in Davie follows its own rules, and the national cost guides don’t reflect them. A compliant replacement means a Florida Product Approval door, matched wind-rated hardware, a pulled permit and disposal, which puts a single-door replacement at $1,600 to $2,200 rather than the $1,100 to $1,300 most guides cite. Repairs are the cheaper path when the door can be repaired – $180 to $340 for a spring, $350 to $850 for a new opener installed. Whatever the job, demand a written line-item estimate and confirm the permit and door rating before signing. The price you agree to is the price you pay, and any reputable company in Davie will put that in writing.
If you’re pricing a replacement or a repair in Davie, call Davie Garage Door Repair Pros at (855) 658-4182 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. One call covers repair, install, or emergency, and the quote you get is the quote you keep. Start with a look at Davie Garage Door Repair Pros and we’ll take it from there.
Written by the team at Davie Garage Door Repair Pros.